Oil & Gas Industry

We have approximately 1,000 actuators installed on seven vessels with the earliest put into service in 2001. It is still true that there have never been a reported failure. I have asked our maintenance and field personnel on each vessel about the actuators and have never received a negative comment.

Scott Lambert,
Group Leader Stimulation – Mechanical Engineering, Baker Hughes


Select one of the applications below to learn more...


Natural Gas Metering

Natural Gas Metering
Customer was experiencing reliability issues due to corrosion of ferrous components causing leakage and reduction of torque output.
Learn More

Pre-Load Ballast System

Pre-Load Ballast System
A jack-up rig ballast system requires actuators to be submerged in seawater to depths of up to 30 feet. Original equipment actuators were failing due to water intrusion and resulting corrosion.
Learn More

Fuel Gas Isolation

Fuel Gas Isolation
Combustion turbine required a SIL-2 rated assembly that had Partial Stroke Testing capabilities to allow extended intervals between full stroke testing.
Learn More

Heavy Crude Feed Filter

Heavy Crude Feed Filter
Heavy crude filter banks typically consist of 12 or more actuated valves, and are subject to high ambient temperatures and cycle conditions.
Learn More

Neat Cat Gasoline

Neat Cat Gasoline
The customer had a modulating fail open actuator requirement for a 12” 300# high performance butterfly valve, but other scotch yoke type actuators couldn’t meet the valve torque requirements without exceeding the valve MAST.
Learn More

Compressor Discharge

Compressor Discharge
Natural gas compressor discharge valves are typically large and use pneumatic actuators. This particular valve is modulating and requires precise control. Performance and delivery were key factors for this customer. (line pressure 1150-1350 psig)
Learn More
Click Here To Contact A Sales Representativeor call us at 888.228.8848
Technical Data

Product Bulletins

Drawings

Instruction Manuals

White Papers

Brochures